Attic Insulation Installation In Big Spring, 79720

Big Spring summers push past 100 degrees, and winter cold snaps can show up fast. If your attic is thin on insulation or full of gaps, your AC runs hard in July, rooms stay drafty in December, and dust blows in on windy days. Odessa Spray Foam Solution Inc installs spray foam and attic insulation for homes, shops and commercial buildings in Big Spring, TX.

We’re based in Odessa and travel to Big Spring for insulation jobs. Every job starts with an inspection and a written quote, so you know the price before any work begins.

Call (432) 847-2090 to ask about a job in Big Spring.

Why Big Spring Homes Lose So Much Energy

West Texas sun, wind and dust put constant strain on roofs, attics and AC systems. Older ranch-style and mid-century homes often have thin, settled or damaged insulation and gaps around framing, attic hatches and ducts. Newer homes can still be under-insulated or poorly sealed. The result is an attic that runs far hotter than the rooms below, an AC that never catches up and uneven temperatures from room to room.

Fiberglass and blown-in insulation slow heat down, but air still moves through gaps. Spray foam expands to fill cracks and gaps, seals the attic and insulates in one step, which is why many homeowners notice steadier temperatures after a job. It isn’t right for every home. If your insulation is in good shape and the real problem is HVAC or a roof leak, we’ll tell you that instead of selling you a full job.

Our Insulation Services in Big Spring

• Closed-cell spray foam: dense, high R-value foam that resists moisture. A strong choice for roof decks and metal buildings.
• Open-cell spray foam: lighter and more affordable, with good air sealing and sound control for most standard attics.
• Attic insulation installation: inspection, measuring, written quote and clean installation, start to finish.
• Attic insulation removal: safe removal of old, wet or contaminated insulation before new material goes in.
• Thermal imaging scan: shows where your home is losing energy, so you only pay to fix what needs fixing.
• Commercial attic insulation: shops, offices, warehouses and metal buildings.

For damage after a leak, storm or pests, see our emergency insulation repair page.

How It Works

1. Call or request a quote. Tell us about your property and what’s bothering you: hot rooms, high bills, old insulation or damage.
2. Inspection. We check your attic, measure the space and look at the insulation already there. Because we travel from Odessa, we’ll tell you how we schedule Big Spring jobs when you call.
3. Written quote. You get the foam type, thickness, board feet and total price in writing.
4. Installation. Most homes take about one day. We protect your home during the job and clean up afterward.
5. Walkthrough. We go over the finished work with you.

Spray foam crews use protective equipment, and people and pets should stay out of the work area during application. We’ll tell you when it’s safe to return, based on the product used.

What Does Spray Foam Cost in Big Spring?

Spray foam in Texas is priced by the board foot, which is one square foot at 1 inch thick. Open-cell typically runs about $0.44 to $1.00 per board foot installed, and closed-cell about $1.00 to $2.50. Most whole-home spray foam jobs in the region run $2,000 to $6,000, depending on foam type, thickness, attic size and prep work, and small jobs may be subject to a minimum charge. Travel to Big Spring may affect your quote, and we’ll tell you before you decide. Our spray foam insulation cost guide for Odessa shows how the math works.

Some utility and local programs may help with costs, and these change often. The federal 25C tax credit ended after 2025. Our rebate assistance program page explains what to check.

Why Big Spring Property Owners Call Us

• Clear written quotes. Foam type, thickness, board feet and total price, before any work starts.
• Honest recommendations. Open-cell, closed-cell, a repair or no job at all: we’ll tell you what fits.
• One crew, start to finish. Inspection, removal if needed, installation and cleanup.
• Residential and commercial. Houses, shops and metal buildings.
• Based in the Permian Basin. We understand West Texas heat, dust and wind, and how they affect buildings.

Not sure which insulation fits your property? Our guide on how to choose the best attic insulation for Texas homes walks through the options.

Big Spring Insulation FAQ

Do you really serve Big Spring?
Yes. We’re based in Odessa and travel to Big Spring for insulation jobs. Call (432) 847-2090 to confirm availability and scheduling for your address.

How much does spray foam insulation cost in Big Spring, TX?
Most whole-home jobs in the region run about $2,000 to $6,000, depending on foam type, thickness and attic size. Travel may affect your quote, and we’ll tell you before you decide.

Open-cell or closed-cell: which is better?
Open-cell costs less and works well in most standard attics. Closed-cell is often better for roof decks in extreme heat, metal buildings and moisture-prone areas.

Do I need to remove old insulation first?
Only if it’s wet, damaged, contaminated or heavily compressed. Clean, dry insulation can sometimes stay. We check during the inspection.

How long does installation take?
Most homes take about one day. Larger or more complex jobs can take two.

What if I need help after a leak or storm?
Call us and describe what’s going on. We’ll tell you the earliest time we can inspect. A roofer should fix any leak first, then we remove the damaged insulation and replace it.

Also Serving Nearby Areas

Besides Big Spring, we serve Odessa, Midland and the wider Permian Basin.

Get a Written Quote in Big Spring

Don’t spend another summer with a hot attic and high cooling bills. Call (432) 847-2090 or request an estimate. Tell us your address and what you’re seeing, and we’ll give you a clear written quote. No pressure.